蓄熱式熱力焚燒爐(RTO) 的關鍵部件一蜂窩陶瓷蓄熱體， 具有單位體積煥熱面積大、傳熱快、氣流阻力小，透熱深度淺、熱效率高等優點。

目前，蜂窩陶瓷蓄熱體的孔型以方孔為主，在實際使用中，方孔蜂窩陶瓷蓄熱體存有在以下兩個問題:A.蜂窩陶瓷蓄熱體的十字筋容易堵塞上下兩層蜂窩陶瓷，從而加大蜂窩陶瓷的壓降; B.由于氣流通過蜂窩陶瓷直孔時，沒有水平方向的流動，無法保證橫截面上氣流的均勻性;所以造成實際的熱回收率要小于理論熱回收率。

為了解決以上方孔蜂窩陶瓷蓄熱體普遍存在的問題，通過對蜂窩陶瓷產品的結構和生產工藝的創新，我公司開發生產的蓄熱式熱力焚燒爐專用蜂窩陶瓷蓄熱體一片狀組合式蜂窩陶瓷蓄熱體， 內部蜂窩結構采用"T"形排列設計，代替了原有普通蜂窩陶瓷的“+”形方孔結構排列，解決了產品在使用過程中的堵孔情況;同時，內部蜂窩孔具有連通式結構，增加空隙率，減少氣流壓降，改善整個截面上氣體分布，使氣體分布更均勻，提高了設備熱回收效率。

1、產品型號: 160型、180型和200型

2、產品規格: 305mm x 305mm x 101mm; 101mm x 101mm x 101mm

Ceramic honeycomb regenerator, the key component of regenerative thermal incinerator (RTO), has the advantages of large heating area per unit volume, fast heat transfer, small airflow resistance, shallow heat transmission depth and high thermal efficiency.

At present, the holes of honeycomb ceramic regenerator are mainly square holes. In practical use, the honeycomb ceramic regenerator with square holes has the following two problems: A. The cross bars of honeycomb ceramic regenerator are easy to block the upper and lower layers of honeycomb ceramics, thus increasing the pressure drop of honeycomb ceramics; B. Because the air flow through the straight holes of honeycomb ceramics Directional flow can not guarantee the uniformity of air flow on the cross section, so the actual heat recovery rate is less than the theoretical heat recovery rate.

In order to solve the common problems of honeycomb ceramic regenerator with square holes, through the innovation of the structure and production technology of honeycomb ceramic products, the honeycomb ceramic regenerator for regenerative thermal incinerator specially developed by our company is a piece-like composite honeycomb ceramic regenerator. The internal honeycomb structure is designed with "T" arrangement. In addition, the inner honeycomb hole has a connected structure, which can increase the void ratio, reduce the air pressure drop, improve the gas distribution on the whole section, make the gas distribution more uniform, and improve the heat recovery efficiency of the equipment.

1. Product models: 160, 180 and 200

2. Product Specification: 305 mm x 305 mm x 101mm; 101mm x 101mm x 101mm